South America · Factory Direct
Activated Carbon Supplier in Chile
Factory-direct pellet and granular activated carbon for Chilean industry — VOC control at mining sites, process water polishing at copper and lithium operations, and municipal drinking water treatment. Ships CIF San Antonio or Valparaíso in 30–40 days.
Applications We Supply in Chile
Chemical, Mining & Food Processing
🏭 Industrial VOC & Solvent Recovery
4mm anthracite-based pellet carbon (CTC ≥50) for gas-phase VOC adsorption in mining chemical handling, solvent recovery units, and food processing ventilation. Low pressure drop across packed beds, high CTC for heavy organics. Documented delivery to Chilean industrial clients.
Anthracite Pellet 4mm · CTC ≥50 · Hardness ≥95%
Case: 44 tons pellet carbon shipped to Chile — VOC removal →
Mining & Mineral Processing
⛏️ Copper Mine Process Water
Coal-based GAC 8×30 for polishing process water at copper and lithium operations — removing residual reagents, thiocyanate, xanthate and dissolved organics before recycle or discharge. High hardness for long bed life in high-TDS mine streams.
Coal GAC 8×30 · Iodine ≥900 · Hardness ≥95%
Water Utilities
💧 Municipal & Drinking Water
Coconut shell GAC 8×30 and 12×40 for drinking water polishing in municipal plants — THM removal, pesticide control, taste/odour. Low ash, low iron; NSF-grade sourcing available for potable contact.
Coconut GAC 8×30 · Iodine ≥1050 · Ash ≤3%
Forestry & Paper Industry
🌿 Pulp, Paper & Cellulose Wastewater
Powdered activated carbon (PAC) and coal GAC for colour removal and AOX reduction in kraft pulp effluent from Chilean forestry mills — cost-effective compliance with river-discharge standards.
Coal PAC 200 mesh / Coal GAC 8×30 · Iodine ≥800
Grades for Chile
| Parameter | Value | Note |
|---|---|---|
| Pellet grade (VOC) | 4 mm anthracite · CTC ≥50% | Gas-phase packed beds, low ΔP |
| Coal GAC (mine water) | 8×30 · Iodine ≥900 | Fixed-bed vessels, long service life |
| Coconut GAC (water) | 8×30 / 12×40 · Iodine ≥1050 | Potable-contact, NSF-grade sourcing |
| PAC (pulp effluent) | 200 mesh · Iodine ≥800 | Dosed into aeration/clarifier stages |
| Hardness (all grades) | ≥95% | Minimises fines generation in shipping |
| COA / SGS | Included on every shipment | Iodine, CTC, hardness, moisture, ash |
Chilean Entry Ports
San Antonio
28–32 days from China
Main industrial port, bulk chemicals & mining reagents
Valparaíso
28–32 days from China
Container hub, strong customs infrastructure
Antofagasta
32–38 days from China
Northern mining corridor — copper & lithium operations
Transit from Ningbo/Shanghai via Panama Canal. We quote CIF or FOB — most Chilean importers prefer CIF Valparaíso to simplify customs clearance.
Frequently Asked Questions
What activated carbon grade is used for industrial VOC removal in Chile?
4 mm anthracite-based pellet carbon with CTC ≥50% is the standard choice. Pellet form minimises pressure drop in packed-bed adsorbers; anthracite base delivers the high micropore volume needed for heavy organic vapours like toluene, xylene and solvent mixes common in mining chemical handling and industrial paint lines.
Can you supply activated carbon for copper mining water treatment?
Yes. Coal-based GAC 8×30 with iodine ≥900 and hardness ≥95% is used in fixed-bed polishing of copper mine process water. Key targets are residual xanthate collectors, thiocyanate, and dissolved organics from flotation circuits. The coal grade is cost-effective for the high-volume, lower-purity-requirement streams typical in tailings water recycling.
What shipping route does activated carbon take to Chile?
We ship from Ningbo or Shanghai via the Panama Canal to Chilean Pacific ports — San Antonio, Valparaíso, and Antofagasta. Transit time is 28–38 days depending on destination port and vessel schedule. We provide full shipping documents: BL, COA, packing list, MSDS.
What is the minimum order for Chile?
One-ton LCL for samples and small sites; 20-ton FCL (1×20HQ) is the standard container order. Multi-container repeat orders qualify for fixed quarterly pricing. We can quote CIF Valparaíso or FOB Ningbo — most Chilean importers prefer CIF to simplify customs.
Do you supply activated carbon for lithium brine processing?
Activated carbon is not a primary sorbent in conventional lithium evaporation ponds. Where it is used in lithium operations is in process water polishing — removing organic residues from downstream refining — and in MCDI electrode research applications. If you have a specific process requirement, send us the water chemistry and we will recommend the right grade.
Get a Quote for Chile
Send your grade, quantity, and destination port. We respond within 24 hours with pricing and a sample offer.
Request a Quote